 |
E-Z Bore® Self-Feed Wood Boring Bits (Datasheet)
Greenlee E-Z BORE® self-feeding bits feature a wide double-blade design that cut faster and won't clog with wood chips. The replaceable self-feed tip pulls the blade through the wood and the outer teeth work to reduce splintering, making easy work of boring holes in wood
|
 |
910CL Optical Fiber Cleaver (Datasheet)
The Greenlee Communications 910CL Optical Fiber Cleaver is a precision optical fiber cleaver that helps cable technicians prepare single and multi-mode fiber optic cable for splicing. Best used when paired with the Greenlee Communications 910FS Optical Fusion Splicer, the 910CL features rotating blades for long life and cleaves fiber accurately and consistently every time.
|
 |
910FS Optical Fusion Splicer Kit (Datasheet)
Designed to meet virtually and FTTx application, the 910FS Optical Fusion Splicer Kit helps data technicians cleave, splice, and solve a variety of fiber optic problems. The 910FS also features Core Alignment to minimize splice losses and rework time, as well as dual cameras, 24X magnification, and a 5.7" color LCD screen
|
 |
LP6 Low Pressure Cutting and Crimping Tool (Datasheet)
The Greenlee Utility LP6 is a low-pressure hydraulic crimping and cutting tool for use by professional linemen. The LP6 incorporates many of the same features as the EK425L Gator® battery-powered tool, but in a low-pressure hydraulic package
|
 |
Tele-Mate® Pro Telephone Test Sets (Datasheet)
The TM-700 helps technicians install, service, and maintain voice services with ease. DSL compatible in both Monitor and Talk modes, the TM-700’s LCD screen makes reading polarity, voltage, current, and ringing frequencies easier than ever, and clearly shows speed dials and recent numbers for faster access.The TM-700 features over-voltage and over-current detection for safer operation and also features an intercom mode, a built in toner for pair tracing, and DTMF detection and measurement for enhanced productivity. Use the built in loudspeaker or with a headset (included) for easy hands free operation.
|
 |
Speed Punch™ (Datasheet)
From the leaders in knockout technology comes the new SPEED PUNCH™System. The patent pending “no thread” design eliminates cross-threading, while the innovative SPEED LOCK mechanism quickly secures the punch in place. This means longer tool life and faster punches, saving you time and money on the job. SPEED PUNCH™ is available in 3/4” - 2” conduit sizes and three kit configurations.
|
 |
EK1550FTLU 15 ton crimpers (Datasheet)
Greenlee's new 15 ton flip top crimping line offers professionals more capacity with improved consistency, improvied usability due to 32% weight reductiuon and a safer alternative from enclosed crimping head. The EK1550FTLU crimping tools provide increased crimpint capacity of up to 1250 MCM aluminum and 1500 MCM copper color coded lugs and splices with no deflection when crimping and a 18V lithium ion battery with 70% more cycles per charge and faster cycle times
|
 |
EHP700LU 10,000 PSI battery powered hydraulic pump (Datasheet)
The new EHP700LU sets a new benchmark for portability. Weighing a mere 14.1 pounds, the EHP700LU easily goes where you go. Suitable for single acting cutting, crimping and punch tools of up to 10,000 PSI, Greenlee's new power pump was designed for performance, ergonomics and economic efficiency
|
 |
EHP700L 10,000 PSI battery powered hydraulic pump (Datasheet)
The new EHP700LU sets a new benchmark for portability. Weighing a mere 14.1 pounds, the EHP700LU easily goes where you go. Suitable for single acting cutting, crimping and punch tools of up to 10,000 PSI, Greenlee's new power pump was designed for performance, ergonomics and economic efficiency.
|
 |
881 Mobile Bending Table - (Datasheet)
Conduit bending with Greenlee’s 881 Bender has gone mobile. Introducing the Mobile Bending Table, Greenlee’s newest bending innovation. It’s a patent pending, all-in-one bending solution that gives operators the power and performance of the popular 881 Bender on a wheeled table. It is quick to set up, stores all components for the 881 Bender and can wheel around the jobsite with ease – saving crews nearly an hour with every move.
|
 |
Stainless Steel Punches - (Datasheet)
Greenlee is proud to introduce larger punches for stainless steel. The proprietary cutting edge extends punch life and punches more holes. With the ability to punch 2-1/2", 3", 3-1/2" & 4" holes in up to 10 gauge steel, we've got the punch you need.
|
 |
Digital Multimeters DM-25, DM-45 and DM-65 - (Datasheet)
Greenlee is pleased to announce the introduction of our NEW Digital Multimeters. Part of a great value is having exactly what you need in a tool. Frequency, capacitance, duty cycle, temperature, battery test and analog bar graph are just some of the features available on these meters. All are designed for increasing efficiency on the job.
|
 |
The best Time Domain Reflectomoeter (TDR) in the cable TV industry just got better! New features and performance enhancements include: 1.5 lbs. lighter weight; 3-4 times faster trace update rate; better noise rejection; li-ion batteries that last almost twice as long; USB port; records management software that downloads and stores TDR traces; and field upgradeable software..
|
 |
UT10-2S Ultra Tugger® 10 & Mobile VersiBOOM™ II - (Datasheet)
Pulling isn’t easy! No two cable pulls are ever the same: different conduit materials, length of pulls, number of bends, even the environments for the pull are all examples of the challenges you face to get the job done. Add that to the fact that time is money and electricians have a real challenge.
Greenlee has a solution! A faster way to overcome many of the challenges you face in pulling while also enhancing your bottom line - the NEW 2 Speed Ultra Tugger® (UT10-2S) and the Mobile VersiBoom™ II.
|
 |
HW1 & HW1V Hydraulic Impact Wrench (Datasheet)
The high-torque, high-speed HW1 and HW1V Hydraulic Impact Wrenches feature industry-leading torque and speed. With high strength casting, reduced weight and widened trigger design, these wrenches turn at up to 6,500 rpm and drill holes through hardened poles in seconds rather than minutes. And, they have the torque (500 ft.-lb.) to break most rusty pole hardware. In addition, these wrenches feature design improvements that include a handle that reduces heat transfer, improved center-of-gravity for better balance and superior ergonomics, and increased expected service life. This new design is available in both fixed and variable torque models.
|
 |
These five unique products combine to enable professional installers the ability to field-terminate and test HDMI® cables. The benefits of field-terminated HDMI® cables include custom length premium HDMI® cables, the elimination of cable clutter, and reduced cost over pre-terminated cables.
|
 |
Introducing Greenlee’s NEW line of professional knives designed for the trades. Included in the new line are six knives developed with Old Timer®, expert knife-makers and a brand of knives prized by generations of Americans for their reliability, durability and value. All of these products, designed specifically for the professional, are exclusive to Greenlee.
|
 |
Greenlee's High Dexterity Gloves - (Datasheet)
Our new gloves are made from premium materials and are designed to offer an optimal combination of dexterity, comfort and protection. State-of-the-art moisture management fabric wicks away sweat to keep hands dry. High-density foam padding absorbs impact and vibration. Reinforced pull tabs make it easier to put on the gloves while prolonging seam life and double-stitched wear pads on the fingers and palms add durability. Stretch panels offer increased dexterity and comfort and molded hook and loop strap adjusts comfortably to the wrists and keeps debris out.
|
 |
Quick Change Carbide Tipped Masonry Bits - (Datasheet)
The new Quick Change Carbide Tipped Masonry Bits have a one-piece hardened carbon steel body and hex shank to provide a stronger bit that will not diassemble when drilling in deep or in tough materials. They are hammer drill rated with a carbon grade tip for faster penetration, easier drilling and longer bit life.
|
 |
TG-1000 & TG-2000 Thermometers - (Datasheet)
Infrared thermometers provide speed, convenience, accessibility and safety when taking temperature measurements. The new TG-1000 and TG-2000 both feature the high optical performance, measurement accuracy and quality necessary for the professional. Both IR thermometers include the capability to display temperature in either Fahrenheit or Celsius, vivid backlight displays, digitally adjustable emissivity, adjustable high-low temperature alarms, plus minimum, maximum, difference and average functions.
|
 |
SDS-Plus Carbide Tipped Masonry Bits - (Datasheet)
Made for the Professional - The new SDS Plus Carbide Tip Masonary Bits are hardened through for heavy shock resistance and longer bit life, providing exceptional performance. The 5-piece set includes bit diameters and lengths most commonly used by electricians, providing more value versus buying bits separately.
Fast and Easy - The hardened premium carbide tip easily breaks up material and the H-Style flute design allows for fast and easy material removal, saving valuable time.
|
 |
FF2200 FishFinder Vision Systems Plus - (Datasheet)
Greenlee's FishFinder Plus Vision System offers CAT IV rated optical cable for troubleshooting around engergized circuits.
|
 |
LS50L Battery-Powered Knockout Punch Driver - (Datasheet)
LS50L Battery Powered KnockOut Punch Driver punches holes from any angle with the 360° rotating head. Punches up to 6" holes in 14 gauge mild steel and 2" holes in 14 gauge stainless steel. One trigger controls all tool functions, no additional manual work is required. Automatic retraction prevents damage to punch & die. The LS50L uses 18V Lithium-Ion technology.
|
 |
Greenlee is proud to introduce our NEW 0952-01 MC Cable Cutter. This innovative product allows professional electricians to cut metal-clad cable up to one inch in diameter. The patent-pending cam-action of the cutting blade is designed for shallow cuts to greatly minimize the chance of nicking wires.
|
 |
NailEater® Extreme Black Teflon® (Datasheet)
The new Greenlee Utility Nail Eater® Extreme Black Teflon® coated utility auger bits drill fast and smooth in most treated woods, including tough utility poles. Made in the USA, the patented cutting edge cuts nails and staples so these auger bits last much longer than other Teflon® coated bits on the market. And, with less power required to drill holes - extending battery life up to 30% - these auger bits help save time and money.
|
 |
PROVL™ Lithium-Ion Power Tools - (Datasheet)
Electrician trusted for nearly 150 years, Greenlee is proud to announce its new line of top-performing Lithium-Ion power tools. Professional, versatile and lightweight, these tools are the perfect companion to our industry leading holemaking and power tool accesssory products. With this winning combination you will acheive optimum performance on the job, day in and day out.
[(PROVL Power Tools Video)]
|
 |
Battery Powered ACSR Cable Cutters (Datasheet)
Greenlee is pleased to announce 3 new battery powered cable cutters. They are intended for cutting ACSR type cable, but each of them can also cut additional materials. Greenlee now offers a total of 5 battery tool choices for cutting ACSR. The ESG55L, with a 2-1/8" capacity, is designed to cut the largest ACSR cables, ground rods and guy strands. It makes an excellent tool for transmission construction and maintenance crews. The ESG25L will cut up to 636 kcmil cable, making it an excellent tool for distribution crews. The ES20L is unique in that it has scissor style blades. This makes it the only battery ACSR cutter that will cut the short tag cable ends on H-tap type connectors. The ES20L will cut up to 336 kcmil ACSR.
|
 |
Reciprocating Saw Blades - (Datasheet)
Greenlee is proud to announce our NEW and IMPROVED Reciprocating Saw Blades. Our new blades cut up to 25% faster and last up to 45% longer than the competition, providing the best value per blade. The new blades are made from bi-metal material with cobalt for added toughness and versatility so the blades last longer.
The superior tooth design stays sharp longer for faster cuts, saving you valuable time on the job. We also added more blade types to expand the variety of materials and applications.
With faster and more robust performance than ever before, Greenlee is now the clear choice for all your Reciprocating Saw Blades.
|
 |
The NETcat® Pro2 is a digital tool for fast, accurate checking of cables, wiring and network service. Operated using a back-lit touch screen display, the NETcat® Pro2 tests wiring continuity and proper pair allocation, measures the length of cables, determines if network service is available and identifies Power over Ethernet (PoE) cables.
|
 |
DM-860A Industrial Digital Multimeter - (Datasheet)
The DM-860A is a full featured Industrial Digital Multimeter that offers the highest level of safety protection with a UL Category IV, 1000V rating with superior accuracy and performance. Dollar for dollar the Greenlee DM-860A Digital Multimeter provides the features, functions, and overall value demanded by today’s professionals.
|
 |
SDK105 4" Remote Cable Cutter - (Datasheet)
When you need to cut large diameter electrical cables, the new Greenlee SDK105 Remote Cable Cutter is up to the task. It cuts cables up to 4" (105 mm) in diameter, and the hardened blades are capable of cutting soft steel armored cables as well as lead sheathed cables. The SDK105 can be powered by any hydraulic pump capable of developing 10,000 psi (700 bar). It features scissor style blades designed to easily get around cables, and they will even pick up cables off of the ground.
|
 |
The new Greenlee 990 hydraulic pump was developed specifically for use with remote hydraulic cutting and crimping tools that require 10,000 psi (700 bar). At 32 pounds (14.7 kg), the pump is easy to move from job to job yet it has plenty of oil to operate remote hydraulic tools.
|
 |
Lithium Ion Battery Powered Cable Cutters - (Data Sheet)
The lastest of Greenlee's very popular ES32 type cutter are the ESG25L series. The ESG25L cutters offer the ability to cut ACSR type cable. The ES32L cuts standard stranded copper and aluminum power cables while the ES32FL cuts fine stranded flexible copper cables. Locomotive cable, welding cable, wind turbine cable, battery cable and marine engine cable are examples of the flexible cables that the ES32L is designed to cut. No matter what you need to cut The ES32L line as a tool to fit your need. The tools are lightweight, easy to maneuver into tight locations, and have scissor style blades that make it easy to get around cables. Plus, they utilize the new advanced technology Greenlee “L” series platform with state-of-the art 18 volt Lithium-Ion battery power.
|
 |
CR100 Cable Tray Roller Guide - (Datasheet)
The new Greenlee CR100 Cable Tray Roller Guide was developed to ease installation of power cables in cable trays. It has rollers on four sides to trap cable within the guide while the cable is being installed. When the installation is complete, the guide can be swiveled open to remove the cable simply by pulling a single pin. The CR100 also features a sturdy clamp that permits it to be attached to cable trays in several positions.
|
 |
941 Quick Change D'VersiBIT® System Kit - (Datasheet)
Greenlee is proud to offer the new Quick Change D'VersiBIT® - the ultimate in on-the-go jobsite versatility. Quickly and easily switch from drilling to pulling with the quick change pulling grip eliminating the need for hooking a pulling grip to the bit.
|
 |
Insulated Hand Tools - (Datasheet)
Be prepared when working on or near potentially energized sources with Greenlee’s new assortment of highquality, insulated tools that exceed ASTM F1505 and IEC 60900 standards. Each insulated tool is designed for safety and built for comfort, featuring a dual-layer of heavy-duty insulation and impact resistant orange coating.
Select from multiple sizes of insulated lineman’s pliers, screwdrivers and nut holding nutdrivers - clearly marked with the industry-standard 1000V icon ( ) so you can be assured you’re working with the best, safest tools for the job at hand.
|
 |
855GX IntelliBender™ - (Datasheet)
The 855GX is Greenlee’s most advanced programmable bender and has been engineered and designed with a rugged exterior for the most demanding environments - with an absolute encoder-based control system on the inside – to be the most versatile, most dependable and the most intelligent electric bender on the market.
The 855GX has all the capabilities to accomplish the most complicated bends with ease and speed. It can bend 3/4” Rigid (in either the 1” Rigid or 1” EMT shoe grooves) and 1” to 2” inch Rigid, EMT or IMC conduit with just one shoe featuring “smart” sensors that know exactly what diameter conduit and type you are going to bend – and automatically factors spring-back for any angle.
This bender comes with both a robust pendant controller and a state-of-the-art LCD interface that allows the operator to easily program, save and transfer multiple bends via a USB drive making this unit invaluable on jobs that demand many types and high quantities of bends.
[(Video)]
|
 |
555® Series Electric Conduit Benders - (Datasheet)
The 555® Series, commonly referred to as the “triple-nickel,” has been completely re engineered with a rugged exterior for the most demanding environments. And on the inside, the 555DX features an absolute encoder-based control system, making the DX model an extremely versatile and dependable electric bender.
Never before has this bender been easier to operate and more cost-effective to own, with fewer parts and the versatility to handle a wide range of job site power sources. A key advantage to this bender is that you only need 2 shoes to bend all Rigid, IMC and EMT - from half inch to 2 inch instead of 7 shoes on previous models
|
 |
Plastic LED Flashlights - (Datasheet)
Greenlee is proud to announce the introduction of our new line of plastic LED flashlights. These sleek, rugged lights were designed for the professional and offer powerful performance in a compact form. The LED lamps are ultra-bright, long-lasting and provide a solid beam for superior illumination. Rugged all weather construction sealed against water and dust. Attachment accessories for added ease-of-use and increased versatility.
|
 |
Greenlee's new T-Handle Hex Keys were designed for maximum torque and comfort. Shaped for an optimal fit, and with a non-slip rubber overlay, hand fatigue will be a thing of the past. The high-quality chrome-vanadium hardened steel has been precision machined to ensure accurate and sure engagement. And with a forgiving ball-end shaft, you have up to 30 degrees for misalignment which comes in handy when working in tight or akward spaces. These T-Handle Hex Keys offer the premium quality Greenlee is known for and are sure to become a must-have tool for the professional tradesman.
|
 |
SmartMARK™ Laser Eteched Steel Fish Tape with SpeedFlex® Leader - Datasheet
Greenlee is proud to introduce a line of laser etched steel fish tapes with SpeedFlex® leaders and overmolded grip handle. The new SmartMARK™ fish tapes increase productivity with the laser etched distance markings, SpeedFlex® leader and rugged, advanced, no-bump, flared comfort grip with superior rapid pay-out and rewind capability. Whether you need to fish a few feet or up to 250 feet, our SmartMARK™ steel fish tapes with SpeedFlex® leader allow you to fish farther and know how far you have fished, in both feet and meters, improving productivity by saving time with the elimination of a separate measuring step in the installation process.
|
 |
The Jack Terminator™ is a patented product that allows professionals to significantly reduce the time it takes to terminate Cat5 and other UTP communication cables into standard wall jacks. In one simple action, 4 pairs of wire are terminated and the built0in blades cut off the excess wire, eliminating the need for a secondary trim step.
|
 |
68 Piece Electrician's Drill/Driver Kit - (Datasheet)
Greenlee’s new 68 piece Electrician’s Drill/Driver Bit kit includes the bit types and sizes most used by professional electricians. With everything in one place, there’s no need to carry multiple bit kits or buy individual bit sets to create the right combination.
All of the bits are professional grade and meet or exceed ASTM standards. The masonry drills have a hardened shank that is hammer drill rated for better impact driving. The high speed drills are titanium nitride coated, so they last longer and self-center so they don’t walk when drilling. All of the bits and drills in the kit have a ¼” Quick Change hex for easy and fast changeovers. The nut drivers are magnetic and fit most TapCon® fasteners. The kit also includes a 3” magnetic bit holder and quick release chuck with a precise fit and no play so the bit won’t wobble when drilling. Bits in competitor kits are made more for do-it-yourselfer’s where Greenlee’s bits and drills in the new Electricians Drill/Driver kit are made for the trade!
|
 |
F13 Portable Hydraulic Power Unit (Datasheet)
The F13 Portable Hydraulic Power Unit is a 13 HP gas-powered hydraulic power unit with adjustable 5-8 gpm hydraulic oil flow. Achieve greater productivity with less cost of ownership and the smaller size and lighter weight offer easy handling and greater fuel efficiency. The new F13 compliments our larger F20 power unit in applications where only up to 8 gpm flow is required along with enhanced portability. The F13 can be used to run most low pressure Type 1 or Type 2 HTMA class tools including breakers, post drivers and pullers, water and trash pumps, chainsaws, pruners, pole tampers and pullers, ground rod drivers, impact wrenches, drills and low pressure crimping tools. Weighing 35% less and being 50% smaller by volume than the F20 or similar large power units, the F13 provides users with greater versatility when working in small outdoor spaces along with easier handling and work vehicle loading and unloading. Greenlee Utility offers the best and most reliable power unit choices to get your job done faster, safer and easier.
|
 |
The new Nail Eater® R/T offers a Replaceable Tip that cuts more than 175 holes in wood with nails. That’s up to 9 times the life of some traditional auger bits. Not only does it last longer, it provides the convenience of just changing the tip instead of switching to a new bit after it's worn. Additionally, the cutting edge is made from high quality tool steel, so it performs better than traditional auger bits when drilling in wood with nails. The new Nail Eater® R/T not only saves room in the tool bag, but money and time too. [NailEater R/T Video]
|
 |
Nut Holding Nut Drivers - Datasheet
Greenlee's new line of Nut Holding Nut drivers offer a rugged hollow shaft for screw clearance and a precision tapered socket that holds the nut for one-handed operation. Get them individually or in a kit with seven sizes available.
|
 |
LED Aluminum Flashlights
Greenlee is proud to introduce our new line of Aluminum LED flashlights. Long life LED light source, aircraft grade anodized aluminum and a rugged, anti-roll, all weather design make this flashlight the only one you'll need.
|
 |
Tone & Probe Tracing Kits - Datasheet
Greenlee's new Tone & Probe kits offer superior tracing for low voltage applications such as telephone, data and security alarm wiring. Essential equipment for the internal wiring technician, our kits provide the ability to check voltage on wire pairs as well as generate a tagging tone along the wire, which is then picked up by the tracing probe.
Featuring overall improved internal circuitry in both the amplifier and the tone generator, all of the new tone and probe kits promise to provide an enhanced customer experience for tracing and identifying single conductors or cables within bundles, either at midpoint or at remote ends.
|
 |
9522 Hanging Cable Dispenser - (Datasheet)
The Greenlee 9522 is the new way to dispense NM type cables. It can be hung from virtually anything—ceiling joists, a nail, or a ladder lock arm. It holds a full spool of NM or MC cable (up to 75 lbs.), and it spins to dispense the wire easily and evenly without overrunning. When the job is done, it can be collapsed, folded, and stored in the included bag so it takes up little space on a truck or in a storage box. The 9522 is made from aluminum tubing, steel hooks and joint plates, and tough nylon straps. It only weighs 3-1/2 lbs. so it is easy to move around a jobsite.
|
 |
LS60L Battery-Powered Knockout Punch Driver - (Datasheet)
The Greenlee LS60L Battery-Powered Knockout Punch Driver is now part of the new line of Greenlee “L” Series Gator tools with Lithium-Ion power. It makes the holemaking process even easier than before.
More Power - State of the art 18V lithium-ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times—punch a hole for 2”conduit in about 10 seconds.
More Intelligent -LED light provides the operator with the battery charge and tool maintenance status. Smart battery chargers control the charging current, charging voltage and battery temperature to maximize battery life.
More Ergonomic - One trigger controls all tool functions. Overmolded tacky grip areas make gripping the tool easier and more comfortable. LED work light illuminates dark work areas.
More Green -LS60L tools use biodegradable oil.
|
 |
4024, 4036 and 4048 Conveyor Sheaves - (Datasheet)
The new Greenlee conveyor sheaves feature solid side plates without a steel framework. Without the framework, they are much easier to use when going around corners or when going into vaults, and they are lighter in weight for easier handling. The new sheaves are available in 24”, 36”, and 48” radii so they can be matched to the minimum bend radius of the cable. The new sheave assemblies all use 6” diameter x 5” wide sheaves to accommodate large diameter cables. Each conveyor sheave assembly is equipped with two yoke and hook assemblies for ease in attaching to building and vault structures.
|
 |
ES1000 Battery Powered Cable Cutter - (Datasheet)
With the ES1000, cutting copper and aluminum cable is fast and easy. Simply wrap the blade around the cable and pull the trigger. In about 8 seconds it will cleanly cut 1000 kcmil copper and aluminum cable, and with a 2-1/8" diameter blade opening, it easily cuts jacketed underground cables. The ES1000’s light weight (under 7-1/2 pounds) and small size (only 14-3/4" long) makes it easy to store on a truck, carry to the jobsite, and operate in tight spaces. The ES1000 is equipped with a forward/reverse lever so that if you change your mind about cutting a cable, you can shift the lever and fully open the blades. The blades on the ES1000 are extra thick so they don’t flex during a cut and they are precision ground. This combination results in thousands of smooth cuts.
|
 |
Greenlee is proud to introduce our new and improved Hole Saws. These Hole Saws were designed to cut faster, last longer and provide even greater value than before. The new and improved Greenlee Hole Saw cuts up to 30% faster than the competition – saving you time and money on the job.
|