ETS12 Battery Powered Steel Cutter - (Data Sheet 303K)

The new Greenlee ETS12 is a small lightweight battery-powered tool for cutting a wide variety of mild steel products. Think of it as a battery-powered bolt cutter. It can be used to cut bolts, threaded rod, solid hasp and cable hasp one-time locks, shipping container seals, and many other items. The ETS12 cuts fast. It only takes about 4 to 5 seconds per cut, and when the cut is complete, the ETS12 automatically retracts to be ready for the next cut.

727M Cable Cutter - (Data Sheet 234K)

The Greenlee 727 cable cutter now comes in two versions. The standard 727 has the familiar PVC handle grips. The new 727M is the same high performance tool with custom molded grips. These new molded grips feature a hard underside for strength and a soft, slip-resistant, ergonomic outside for increased comfort. Also, the extra width of this grip provides a larger load bearing area that makes cable cutting even easier. Feel the difference that the softer, wider grips make. [Press Release]

KP1022 Crimping Tool - (Data Sheet 220K)

Why buy two crimping tools when one tool can do it all? The new Greenlee KP1022 is capable of crimping both insulated and uninsulated terminals and splices from 10-22 AWG and it’s easy to carry in a tool pouch. With long curved handles and doublecushioned grips to provide good leverage and comfort, the KP1022’s precision-machined and hardened cutter blades at the nose of the tool make cutting copper and aluminum wire easy. [Press Release]

Ultra GLIDER™ Cable Pulling Lubrication System - (Data Sheet 1.3 MB)

The Greenlee UG5 Ultra GLIDER™ is the “new way” to effectively apply cable lube during cable installation. The Ultra GLIDER™ has several advantages over the manual method used by most contractors today. The UG5 saves labor time—in many cases one person can be eliminated during the job because the same person who controls the feeding of the cable can also control the cable lube application. Cable pulling force is reduced by up to 50% because the lube is applied consistently. It also saves lube cost because it applies lube consistently in a controlled manner. [Press Release]

Hand Tool Expansion - (Hand Tool Catalog - 10.6 MB)

Now Greenlee has done it again, with yet another launch of nearly 100 additional hand tools, designed to round out our initial product offering and provide our customers with a comprehensive assortment of the top 200 hand tools used by the professional electrician. Take a look through the pages of this new Greenlee Hand Tool catalog and we think you’ll agree – these tools are designed to make your job faster, safer and easier but more than that, these are the tools you’ll reach for every day. [Press Release]

802K Digital LAN Tracing Kit - (Data Sheet 20K)

The 802K Digital LAN Tracing Kit is a powerful, unique troubleshooting and tracing solution for LANs and other types of VDV wiring. The industry standard 200FP filter probe is designed to eliminate hum from fluorescent lights and AC power wiring that can obscure tracing tones, and the AT8L LAN Toner not only generates multiple tracing tones and provides basic wiring tests, but indicates the presence of 10/100Base-T network service. [Press Release]

DeWalt Heavy-Duty Jobsite Storage - (Data Sheet 3.6 MB)

Introducing the NEW Heavy-Duty Jobsite Storage Solutions by DeWALT®. These new storage boxes are Guaranteed Tough®, and have been designed with the same rugged dependability that makes DeWALT® products famous. Each box comes FULLY LOADED with features, making it an indispensable asset on the jobsite. [Press Release]

HKL-1232 12 Ton Crimping Tool - (Data Sheet 61K)

If you’re looking for an easy to operate and rugged 12-ton crimping tool, the HKL1232 is the tool you need. The HKL1232 has a 2-speed hydraulic pump that advances rapidly until it contacts the connector before shifting to a lower speed to complete the crimp. [Press Release]

UT2 Trailer Hitch Adapter - (Press Release 57K)

Greenlee is pleased to introduce the trailer hitch adapter as an accessory for use with the UT2 cable puller. This adapter permits people to use a truck as the base for the UT2. The UT2 Trailer Hitch attaches to the UT2 main assembly and fits into the receiver of standard 2" trailer hitches.

NETcat® Pro NC-500 Structured Wiring Troubleshooter - (Data Sheet 50K)

The NETcat® Pro is a digital tool for fast, accurate checking of cables, wiring and network service. Operated using a back-lit touch screen display, the Pro not only tests wiring continuity and proper pair allocation, but measures the length of cables and determines if network service is available. When used with the NC-510 Accessory Kit containing seven (7) expansion remote test modules, the NETcat Pro can uniquely test coax or twisted pair jacks from a central location eight (8) at a time. [Press Release] [Product Demo]

NETcat® Micro NC-100 Digital Voice, Data and Video Wiring Tester - (Data Sheet 56K)

The NETcat® Micro is a device that verifies the integrity of both twisted pair and coaxial telecom cables. It uses high-speed digital technology to verify wiring continuity and check for the correct allocation of wire pairs, showing the results on a backlit display. [Press Release] [Product Demo]