Explore Emerson
Select a Country
  • {{country.Text}}
Select a Language
Select a Country
  • {{country.Text}}
Select a Language
Toggle navigation

DRILL,ROTARY IMPACT (HID6506)

Cat #: HID6506
UPC #: 783310423096

DRILL,ROTARY IMPACT (HID6506)

Cat #: HID6506
UPC #: 783310423096
  • Adjustable flow control prevents overspeeding and allows precise control of drilling speed
  • Supports speeds up to 5,400 bpm, generating 13% more blows per minute to help you get the job done quicker
  • Improved design for better balance and ergonomics
  • Hammer drill in concrete, brick, rock, and other difficult-to-drill materials. Makes 16% larger holes in concrete and 11% larger holes in wood
  • Drill in wood or steel with auxiliary chuck
  • Super Spool selector control for use on Open and Closed-Center hydraulic systems
  • Selector for drill or hammer/drill modes
  • Rugged gear motor
  • Built-in slip clutch to guard against over-torque
  • Depth gauge and auxiliary handle are removable for tight areas
  • Reversible
Show Less
Read More
Request a Demo
Request Info
Where to Buy

Specifications

Accessory 54923 HTMA Male Coupler, 54925 HTMA Female Coupler, 139287 Auxiliary Drill Chuck
Blows Per Minute 3400 - 4800 RPM At 6.500 GPM (25.000 LPM)
Capacity Steel 1/2 IN (134.000 MM) Hole, Wood 1-1/16 IN (27.000 MM) Hole, Concrete 3/4 IN (19.000 MM) Hole, Core Bits 3.000 IN (76.000 MM)
Chuck SDS Plus Bit Shanks
Height 9.750 IN (248.000 MM)
Hydraulic Flow Range 5 - 10 GPM (19 - 38 LPM)
Length 12.000 IN (305.000 MM)
Operating Pressure 1000 - 2000 PSI (69 - 140 BAR)
Pressure Port 3/4 - 16 SAE O-Ring Thread
Return Port 3/4 - 16 SAE O-Ring Thread
Speed 775 - 1100 RPM At 6.5 GPM (25LPM)
System Super Spool Selector Control System
Type Rotary Impact
Weight 8.500 LB (3.900 KG)
Width 3.500 IN (89.000 MM)
*Greenlee® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.