Search - All Results
Quick set-up with quick disconnect system to adjust the nose or elbow piece 360 degrees Versatility to change set-up: Nose and elbow piece assembly is now the same allowing the unit to be shortened to only 1 boom with minimal set up The puller itself can be disassembled with ease to be floor-mounted or chain mounted to conduit
Boom uses 3 IN rigid steel conduit for easy length adjustment to pull 10 feet (3 m) of cable out of the box fast and easy Optional Elbow Unit and Boom available to reach into manholes or pull Up to 20 feet (6 m) of cable out of the box
1-1/4" Rigid/IMC; 1-1/2" Rigid Shoe Unit Cat #: 18828 UPC #: 0783310188285 1-1/4" Rigid/IMC 1-1/2" Rigid Shoe Unit For Mechanical Benders Centerline Bend Radius 7-3/8'' (187.300 MM) (Rigid/IMC) for 1-1/4'' Shoe Size, 9.000'' (228.600 MM) (Rigid) for 1-1/2'' Shoe Size
1-1/4" X 1-1/2" EMT Follow Bar Cat #: 18642 UPC #: 0783310186427 1-1/4" & 1-1/2" EMT Follow Bar Mechanical bender follow bar for 1-1/4" and 1-1/2" EMT Conduit Type Conduit Size 1-1/4 and 1-1/2 IN Warranty & Return Policy
2-Speed motor that delivers the fastest pulling time for all pulling needs over the widest (10000 LB) range Strong, rugged motor designed specifically for both big and small cable pulling applications up to 10000 LB On-board force gauge provides visual communication of pulling force and speed changes Quick speed change from high-speed to low-speed by simply double tapping foot pedal
On-board force gauge provides visual communication of pulling force and speed changes Quick speed change from high-speed to low-speed by simply double tapping foot pedal The no-load low speed is 9 FT/MINT and can be used on loads up to 8000 LB where the speed will be 6 FT/MINT, or a momentary peak capacity of 10000LB
Pull up to 6,500 lbs (28.9kN) with less than 27 lbs (120N of operator effort Leaf-type mounting chains won't twist when tightening Heat-treated steel serrated gripper feet for secure mounting to conduit Right-angle sheave allows the operator to stand out of the direct line of force
High speed can pull up to 16 feet per minute up to 4,000 pounds, while low speed can pull 8,000 pounds at 9 feet per minute. The no-load low speed is 9 FT/MINT and can be used on loads up to 8000 LB where the speed will be 6 FT/MINT, or a momentary peak capacity of 10000LB
2-Speed motor that delivers the fastest pulling time for all pulling needs over the widest (10000 LB) range Strong, rugged motor designed specifically for both big and small cable pulling applications up to 10000 LB On-board force gauge provides visual communication of pulling force and speed changes Quick speed change from high-speed to low-speed by simply double tapping foot pedal
Easy to use preheat for 10 minutes, insert PVC, rotate until pliable, remove and form bend Bending tool features sturdy double wall metal with fiberglass insulation and reflective interior for fast, even heat Other features include on/off switch, pilot light and carrying handle Heats 24" long section of pipe
Easy to use preheat for 10 minutes, open lid and position PVC, close lid, rotate until pliable, open lid, remove PVC and form bend Bending tool is constructed from heavy-duty metal with reflective interior for fast, efficient heating Has heating chart, timer, and on/off switch with indicator light for added convenience
PVC Roller Support Cat #: 857 UPC #: 0783310310938 PVC Roller Support (Optional) Warranty & Return Policy Customers Also Viewed Ordering Information
Superior SITE-RITE® sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light Choice of aluminum or iron alloy construction provides options depending on the user's preference for feel and weight All the bender handles area consistent diameter, offering a bigger grip area, while still straight up and down for fast 30 degree bends
Superior SITE-RITE® sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light Choice of aluminum or iron alloy construction provides options depending on the user's preference for feel and weight All the bender handles area consistent diameter, offering a bigger grip area, while still straight up and down for fast 30 degree bends
Superior SITE-RITE® sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light Choice of aluminum or iron alloy construction provides options depending on the user's preference for feel and weight All the bender handles area consistent diameter, offering a bigger grip area, while still straight up and down for fast 30 degree bends
Make bends, offsets or saddles in PVC fast and easy Easy to use: wrap blanket around PVC, secure with hook and loop strap Built-In stiffeners help keep the blanket tight to the PVC surface Controlled, even heating for uniform bending Bending tool comes with heavy-duty cord and thermostat for long life
Low voltage pendant coupled to solid state motor controls eliminates contact arcing for greater reliability and longer life Automatic or manual ram return selector valve provides more control from the pendant switch Molded enclosure protects pump, motor and circuitry in tough working environments Use with single-hose hydraulic systems with spring-return rams
Share Strong, yet lightweight, portable, pin-assembled aluminum components Easy-to-use ram travel scale and charts for accurate bends Make elbows, offsets and saddles Both 884 and 885 bend One-Shot 90°s in 1-1/4" - 4" Rigid conduit Optional shoes available to bend PVC-coated Rigid conduit
Greenlee-approved hydraulic oil Specially compounded for use with Greenlee hydraulic equipment Refinery-filtered to give you the finest oil available Container 1 QT. PLASTIC CONTAINER
Greenlee-approved hydraulic oil Specially compounded for use with Greenlee hydraulic equipment Refinery-filtered to give you the finest oil available Container 1 GALLON PLASTIC CONTAINER
Shoe-Bending 1/2" IPS (883,880,884) Cat #: 10917 UPC #: 0783310109174 1/2" Shoe (Optional) For Rigid Conduit Benders 1/2'' Rigid, IPS Conduit and Pipe Centerline Bend Radius 4.000'' (10.160 CM) Warranty & Return Policy Customers Also Viewed Ordering Information
Large Shoe Support (2-1/2" through 4") Cat #: 16741 UPC #: 0783310167419 Large Shoe Support (2-1/2 through 4) For Rigid Conduit Benders Centerline Bend Radius 12-1/2'' - 20.000'' (317.500 -508.000 MM) Rigid For 2-1/2'' - 4.000'' Size Warranty & Return Policy Customers Also Viewed
2-1/2" EMT/IMC/IPS Shoe Bender Cat #: 26297 UPC #: 0783310262978 2-1/2" Shoe 90° Warranty & Return Policy Customers Also Viewed Ordering Information
1-1/4" Shoe - PVC Cat #: 33459 UPC #: 0783310334590 Shoe Unit 7-1/4" (184.2 mm) Centerline Radius For Bending 40 Mil PVC-Coated Rigid Conduit, 880 And 884 Benders 1-1/4'' IPS 40 MIL PVC Coated Rigid Conduit And Pipe Centerline Bend Radius 7-1/4'' (184.200 MM)
UPC #: 0783310109235 Share 2-1/2 Shoe Rigid for use with 884 and 885 bender Warranty Warranty & Return Policy