BendWorks Works

BendWorks® is an extension  for Autodesk® Revit® designed specifically for electrical contractors that helps Building Information Modeling (BIM)  designers more efficiently optimize electrical conduit runs with advanced features like split-optimization. Bender-specific output files reduce operator errors and allow for a smooth information transfer between BIM designers and the prefabrication shop or job site. BendWorks ensures that all conduit runs are error-free and export-ready for prefabrication or on-site bending with most Greenlee benders, saving time, and reducing cost for the electrical contractor.

Error Checking

Error Checking Vector

Error Checking

  • Verifies design against conduit bending rules and Greenlee bender-specific parameters
  • Four types of color-coded error checking: setting, pre-process, process, and warning
  • Minimum bend radii and tail-end minimum distance
  • Back-to-back minimum distance between bends
  • Maximum 360° of bends per run
  • Auto-ranging of conduit diameters by bender
  • Adjust maximum bend angles and total distance of conduit run

Model and Bend Accuracy

Model and Bend Accuracy Vector

Model and Bend Accuracy

  • Precisely specify coupling gaps for more accurate installation
  • Generate output files to upload directly to your 855GX, use in the BendWorks Go mobile app, or as a text file to print and share
  • Greenlee bender-specific output files provide step-by-step bend instructions to remove guesswork and reduce operator error

Quality Control and Assurance

Quality Control and Assurance Vector

Quality Control and Assurance

  • Retains conduit parameters automatically during model modifications
  • Automatically generates conduit segment and run identification for traceability on the job site
  • Provides output files with required conduit lengths, removing guesswork when buying material

Material Optimization

Material Optimization Vector

Material Optimization

  • Optimizes conduit runs for fewest cuts and segments
  • Automatically align couplings in parallel runs

Purchase BendWorks

DESCRIPTIONPRICE
1 License: 1-month auto renewal $159.99
1 License: 12-month auto renewal $1,600
5 Licenses: 1-month auto renewal $549.99
5 Licenses: 12-month auto renewal $6,050

Customers outside the US and Canada - To place an order, please contact Greenlee Customer Service at [email protected] or by phone at 844-789-8665.

Support

Operating System Compatibility
Revit 2016 - Win7 x64, Win8, Win8.1, Win10 | Revit 2017 - Win7 x64, Win8, Win8.1, Win10 | Revit 2018 - Win7x64, Win8.1,Win10 | Revit 2019 - Win10 | Revit 2020 - Win10 | Revit 2021 – Win 10 | Revit 2022 – Win 10 | Revit 2023
BendWorks supports any type and size of conduit that is supported by the following Greenlee benders:
555, 555C, 555CX, 555DX | 853, 854, 854DX, 855, 855GX |881, 882

Phone support: 1-844-789-8665

Email: [email protected]

Bendworks Application
Introducing BendWorks Go Mobile App
Upload project files from BendWorks to your smartphone or tablet. View project summaries and completion status. View step-by-step bend instructions. Eliminate the need for paper files.