How to Choose the Right Cutting and Crimping Tools for Your Crew

November 19, 2026
How to Choose the Right Cutting and Crimping Tools for Your Crew
 

ROCKFORD, IL. (November 19, 2026) – Choosing the right cutting or crimping tool goes beyond capacity. The application, connection, and working conditions all play a role in determining the right fit. Greenlee answers seven common questions to help crews evaluate their options and select the right tool for the work.

  1. What should you consider first when selecting a cutting or crimping tool?

Start with the application. For cutting, consider conductor material, construction, and size. For crimping, consider the conductor, connector, and approved crimping method. Then, factor in frequency of use, available space, and tool positioning. The goal isn't maximum capacity but a tool designed and rated for the specific cut or connection.

  1. How do conductor size and type affect the cutting tool you need?

Cutting capacity should match conductor material, construction, and size. Copper, aluminum, fine-stranded cable, and ACSR place different demands on a cutter, so a tool's rating for one cable construction shouldn't automatically be applied to another simply because the diameter is similar.

That's particularly important with ACSR. Lineworkers and utility crews should verify that the cutter is specifically rated for the conductor material and size being cut.

  1. What's the difference between 6-ton and 12-ton crimpers, and how do you determine which one you need?

A 12-ton crimper delivers more force than a 6-ton tool, but tonnage alone doesn't determine which crimper you need. The conductor, connector, and approved tool-and-die or dieless combination should drive the selection.

Don't assume a larger conductor automatically requires a 12-ton crimper. Six-ton platforms can cover a substantial range of electrical and utility applications. Verify the conductor size and material, connector requirements, required crimping force, and approved tooling combination before selecting either.

Related Greenlee Tools: EK1240SLX – 12 Ton Crimper and 6 Ton Crimper, Quad Flip Top Inline Li-Ion STD, Bare

  1. When should you consider a die-style versus dieless crimper?

First determine which crimping methods are approved for the connector and conductor combination. If both die-style and dieless options are approved, then consider range and workflow.

Die-style tools use a specified die matched to the connection. Dieless crimpers eliminate interchangeable dies and can accommodate multiple conductor sizes within their rated range, which can benefit crews moving between different sizes or applications. Connection requirements should determine the crimping method before convenience does.

  1. When does a battery-powered cutting or crimping tool make more sense than a manual option?

Battery-powered tools make sense when the application, required force, or repetitive nature of the work makes powered operation advantageous. For crews making cuts or crimps throughout the day, powered operation can reduce manual effort while adding features such as automatic retraction, force monitoring, and tool diagnostics.

Manual tools remain a practical option where powered operation doesn't provide a meaningful advantage. Match the power source to the work rather than frequency of use alone.

Related Greenlee Tool: ESC50LXB - 2″ Inline Cutter

  1. What features can help crews confirm that a crimp has been completed properly?

Greenlee’s Intelli-CRIMP® crimp force monitoring can confirm that the tool achieved the required force during the crimp cycle. All Greenlee Gator® crimpers provide visual or audible feedback if the required force isn't achieved, along with battery-status and diagnostic information.

Crimp force monitoring confirms tool performance during the cycle, not the connection itself. It doesn't replace following the specified conductor, connector, and crimping requirements.

Related Greenlee Tool: 6 Ton Crimper, Li-Ion, Standard, CJK, Bare 

  1. What tool features can make repetitive cutting and crimping easier and more efficient?

For repetitive work, look beyond capacity to features that affect every cycle. Tool weight and balance, head rotation, flip-top designs, trigger and grip design, retraction, and tool-status feedback can all affect workflow and operator effort.

Which features matter most depends on the work. Limited access can make head configuration more valuable, while repeated cuts and crimps can make weight, balance, and retraction more noticeable over a shift.

The Bottom Line

Match the correct cutting or crimping tool to the application requirements by confirming the correct conductor material, construction, lug (if applicable), and size. Then consider access, environment, frequency of use, and features that can improve workflow.

Ready to Put the Right Tool to Work?

Once you've identified the right cutting or crimping tool, Greenlee's current Gator® promotion offers another reason to equip your crew. Through Nov. 30, 2026, purchase a qualifying Greenlee Gator Cutting or Crimping Bare Tool through a participating distributor and receive two batteries and a charger at no additional cost, while supplies last. See the full promotion details and redemption requirements.


About Greenlee

For more than 150 years, Greenlee has been delivering electrical, utility and industrial tools that improve safety, ergonomics and ease of use for trade professionals. As part of Emerson’s Professional Tools portfolio along with RIDGID® and Klauke®, Greenlee delivers reliable solutions designed to perform in the toughest conditions worldwide. For more information, visit Greenlee.com.


About Emerson

Emerson (NYSE: EMR) is a global technology and software company providing innovative solutions for the world’s essential industries. Through its leading automation portfolio, including its majority stake in AspenTech, Emerson helps hybrid, process and discrete manufacturers optimize operations, protect personnel, reduce emissions and achieve their sustainability goals. For more information, visit Emerson.com.

Greenlee®, RIDGID® and Klauke® are trademarks of Emerson or its subsidiaries. All other trademarks belong to their respective holders.

 

# # #

 

 

For more information, contact:

Agency Contact:  Jennifer Hickin ▪ 216.912.2865 ▪ [email protected]

Corporate Contact: Hannah Jakubec  ▪ 779-320-9095 ▪  [email protected]