What is the PSI the C-punch operates at?

Hello, 6,500 psi. Thank you, Professional Tools

Can this punch be connected to an electric hydraulic pump?

Hello, No, it is not compatible with an electric hydraulic pump. Thank you, Professional Tools

I have a Greenlee 1732 punch and some of the tooling is worn out. I need a parts list so i can order individual die holders. Thanks

Hello, These are the several die options for the 1732 C-Frame below: 50117890 Adapter, 1-7/8" x 3/4" die 50117904 Adapter, 3/4" x 3/4" die 50117912 Adapter, 3/4" x 3/8" die Thank you, Professional Tools

What is the die set to go from 1/2" to 4" for the Greenlee 1732?

Hello, Part numbers 735BB, 737BB, and 7304. Thank you, Greenlee Tools

What dies do you use with the C Frame

Hello, You may use the standard round punches and dies. Please advise. Thank you, Greenlee Tools

What is the tonnage rating of the large one shot frame?

Hello, The rating is 6500 psi (44,818 kPa), and it's based on the pump, not the C-Frame. Thank you, Greenlee Tools

What material is the frame made of

Hello, The C-frame is made of aluminum. If you have further questions, please call us at 1 (800) 435-0786 or email us at grntechnicalsupport@emerson.com. Thank you, Greenlee Technical Support

DO YOU GUYS MAKE A 1/4" PUNCH SETUP FOR YOUR C-PUNCH. LOOKING FOR WAYS TO PREFAB LARGER J-BOXES FOR ELECTRICAL DISTRIBUTION

Hello, The smallest punch we offer for the C-Frame punches is 1/2" conduit, we do not make 1/4" punch, that is too small. If you have further questions please contact technical support at 1-800-435-0786.

Can it punch 1 1/2 inch holes in 16 gauge 304 stainless? What punch set would I order? What hyd pump would I use?

Hello, The 1732 C-Frame punch is not designed to be used with stainless steel punches and dies. I would recommend a kit such as a 7506 that is 1/2-2" conduit size punches, dies, and draw studs that are rated to go through stainless steel. This kit also includes the hand pump and ram tool to drive the knockout. If you have further application questions please contact tech support GRNtechnicalsupport@emerson.com or 1-800-435-0786.

Kit hidráulico de armazón en C con bomba de mano

Name: Kit hidráulico de armazón en C con bomba de mano
Brand: Greenlee
SKU: 1732

Cat #: 1732

UPC #: 0783310273615

Kit hidráulico de armazón en C con bomba de mano

Cat #: 1732

UPC #: 0783310273615

Para realizar perforaciones en un solo paso, sin necesidad de agujeros piloto
La boca mide a una profundidad de 8 in
Uso con tamaños de conductos, sacabocados redondos y troqueles estándar de 1/2 - 4 in

Mostrar menos

Más información

Comprar ahora

Solicitar una demostración

Solicitar información

Tiendas en línea
Tiendas cerca de usted

En existencia

Comprar ahora

Visite el sitio para conocer la disponibilidad.

En existencia

Comprar ahora

Visite el sitio para conocer la disponibilidad.

Especificaciones

Tipo	Juego de sacabocados de marco en C
Aplicación	Realiza perforaciones en acero dulce hasta de calibre 10 utilizando sacabocados y troqueles estándar
Grosor	Acero dulce hasta de calibre 10

*Greenlee® puede introducir mejoras y/o cambios en los datos técnicos de los productos en cualquier momento, a discreción propia y sin obligación o anuncio previo, y además se reserva el derecho a modificar o cancelar modelos.