Search - All Results
Application Slug Splitter® SC Knockouts for battery-powered, hydraulic and ram drivers. Capacity up through 10 gauge stainless steel. Size 2 In
Sleeve Adapter, SS Cat #: 1557SS UPC #: 0783310007852 Hydraulic Punch Sleeve for Stainless Steel for Large Size Knockout Units Warranty & Return Policy Customers Also Viewed Ordering Information 1557SS -
For use with all Greenlee hydraulic (manual or battery) drivers Laser markings for quick part identification. Alignment markings for improved accuracy. Easy threading - draw studs with "dog point" tip helps eliminate cross-threading. Hex key access for easy removal from tool. For punching holes in mild steel, stainless steel, aluminum, brass, copper, fiberglass and plastics
Can be used with Greenlee battery-hydraulic knockout drivers, manual-hydraulic knockout drivers, or ratchet wrench. Use with Greenlee dies and draw studs. Punch 10 ga mild steel or 12 ga stainless steel For use in mild steel, stainless steel, brass, copper, aluminum, fiberglass and plastics Optimized for mild steel.
Inteli-PUNCH™ Driver and Case Cat #: LS100XB UPC #: 0783310064817 Time Saver - maximum cycle time of 8 seconds Patent-Pending Auto-Retract Technology - Pressure-sensing technology accurately detects punch completion and automatically retracts the ram, for longer tool lifee 360° Rotating Head - Rugged, patent-pending swivel design to punch at any angle
For use with new Greenlee KRW-1 high-leverage ratchet wrench Slug-Buster® punch profile splits slugs for easy slug removal Easy threading - draw studs with "dog point" tip helps eliminate cross-threading. Knockout set punches, dies and case made in the USA Laser markings for quick part identification. Alignment markings for improved accuracy.
High impact strainer housing Up to 275 gpm (1,041 lpm) Can draw water down to depth of 1-3/4 IN (45 mm) Can run dry without damage Accessory
Knockout sets are laser marked for quick part identification. Alignment markings for improved accuracy. Easy threading - draw studs with "dog point" tip helps eliminate cross-threading. Hex key access for easy removal from tool. Punches, dies, draw studs and case made in the USA For punching holes in mild steel, stainless steel, aluminum, brass, copper, fiberglass and plastics
Laser markings for quick part identification. Alignment markings for improved accuracy. Knockout set is easy to thread - draw studs with "dog point" tip helps eliminate cross-threading. Punches, dies, draw studs and case made in the USA For punching holes in mild steel, stainless steel, aluminum, brass, copper, fiberglass and plastics
Cuts hard-to-reach branches from aerial basket or from the ground Insulated fiberglass extension tubes, tested to meet OSHA Regulation 1910.269 Safety features include: two-step trigger, trigger guard, and fully covered sprocket guard Anti-kickback chain and automatic chain oiler Unfilled and foam-filled extension tube versions offered
Share Measures incandescent, fluorescent, metal halide, high-pressure sodium and halogen lampoutput Color and cosine-corrected for enhanced accuracy Measures up to 50,000 lux Peak and data hold means no lost measurements Accessories included: (1) 9V battery and carrying case
Hand Held, Compact Light Weight Form Intuitive Layout with Rotary Function Selector and Large Test Button Molded in Magnetic Mount allowing lineman to make hands-free measurements Limited Life Time Warranty Accessories Include
Share Hassle-free, automatic measurement of amperage, voltage,and resistance Low impedance eliminates stray or "ghost" voltage readings Compact design for measuring in tight spaces 400A AC, 600V AC/DC measurement
Audible and visual alert when voltage is present Powered by a rechargeable Li-Ion battery HI/LO proximity voltage detector with two voltage ranges, 50V-4kV and above 4kV Sub Brand HDE
UPC #: 0783310628309 Share Measures AC current from 1 to 2000 Amps on system voltages up to 500kV line-to-ground Stores the last 4 readings Dual measurement modes, peak hold and real time Takes spot-load checks with ease Verifies phases are balanced Versatile for overhead and underground applications
MARK® Analog Voltmeter/Phasing Set 0 - 5kV/0 - 15kV Cat #: MARK-V UPC #: 0783310555483 Dual stick MARK series measure voltage and perform phasing operations from 0V to 75kV No batteries or calibration required Determines in-phase or out-of-phase Determines underground cable faults Discharges underground cables and other equipment that hold capacitive charges
Double Vision® Dual Display Voltmeter/Phasing Set 5V-40kV, OH Kit, Base Cat #: DDVM-40 UPC #: 0783310081111 Measures voltage and performs phasing operations from 5V to 40kV Two large displays are synchronized with the same voltage reading shown Versatile for overhead and underground applications Capacitive Test Point and Peak Hold modes
Two die positions permit the KP1022 to crimp both insulated and uninsulated terminals and splices Forged steel and hardened design provides long life Smooth pivot action allowstool to easily be used with one hand Double-cushioned handle grips on the KP1022 are easy on the hands Precision machined and hardened cutter blades make wire cutting easy
UPC #: 0783310031055 Share Ergonomic, total weight is under 2.2 pounds LED work light Crimps 65 percent faster than ratcheting style crimper
Automatic Retraction Stop (ARS) which retracts the ram just enough to get ready for the next cycle saving time and energy Smart chargers control the charging current, charging voltage and battery temperature to maximize battery life Flip-top style uses a pull pin to open head for easy removal from the connector
Features LED display screen communicating pressure and battery levels as well as tool diagnostics with real-time tool feedback. Flip open crimping head will allow crimping of 4 AWG - 1000 kcmil copper or 6 AWG - 1000 kcmil aluminum with no dies to change Registration is quick and easy and the app provides valuable real-time data on your phone or tablet.
Features LED display screen communicating pressure and battery levels as well as tool diagnostics with real-time tool feedback. The EK6IDL consists of two individual pistons (large exterior and a small interior one). The large exterior piston transmits a force of 60kN and crimps all larger cross sections. Registration is quick and easy and the app provides valuable real-time data on your phone or tablet.
Dieless indent style crimping head does not require interchangeable crimping dies Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is belows specifications State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times Automatic Retraction Stop (ARS) which retracts the ram just enough to get ready for the next cycle saving
Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times LED light provides the operator with the battery charge and tool maintenance status In Line tool style is light weight and very easy to control One trigger controls all tool functions Crimping
UPC #: 0783310067498 Share Dies for crimping color-coded aluminum lugs and splices Require UA22 adapter when used with ECCXL, HCCX, & RCCX tools Application